Getting Started
Agilent 4200 FlexScan FTIR Operation Manual
13
WARNING
Electrical Shock Hazard
Avoid shock hazard. Never allow liquid to run into the 4200 FlexScan FTIR
battery compartment.
Power switch LED status
The power button contains a two-colored LED. The color displayed
on the LED can indicate the state of the system. The table below lists
the colors of the LED and the status of the instrument.
Table 1.
Power switch LED status
Status
LED color
Action (% duty cycle)
System OFF
No LED illumination
N/A
System OFF
Red
100%
System startup
Red / green
Green 0.5 s on / red 0.5 s on
System ON
Green
100%
Low battery
Green
50% (0.5 s on / 0.5 s off)
Critically low battery
Red
50% (0.5 s on / 0.5 s off)
Dead battery
No LED illumination
N/A
Firmware update
Red / green
Green blinks rapidly twice then red blinks
rapidly twice
CAUTION
The power button is a momentary switch to avoid accidental power off. In order
to turn the system on or off, hold the button down for two (2) seconds.
NOTE
The 4200 FlexScan FTIR contains a lithium-ion rechargeable battery pack. Agilent
has fully charged the 4200 FlexScan system prior to shipment. The 4200 FlexScan
battery life under continuous use is approximately 4 hours.
Summary of Contents for 4200 FlexScan
Page 1: ...Agilent 4200 FlexScan FTIR Operation Manual...
Page 41: ......
