6-39
Programming Commands
CALCulate Subsystem Commands
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : F U N C t i o n : B W I D t h
| B A N D w i d t h : X : R I G H t ?
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:BWIDth|
BANDwidth:Y:REFerence?
Returns the reference amplitude value for the notch bandwidth marker. The
reference point for the notch bandwidth marker is defined as the highest
amplitude point in the trace. This query generates a “settings conflict” error if
the notch bandwidth function is off for the specific marker.
The units returned are determined by the :CALCulate[1|2|3|4|5|6]:
MARKer[1|2|3|4]:FUNCtion:BWIDth|BANDwidth:X:READout state. For READ-
out of FREQuency, the X value is returned in Hertz. For READout of WAVe-
length, the X value is returned in meters. For READout of WAVelength, the X
value is returned in meters.
Syntax
: C A L C u l a t
e[1|2|3|4|5|6]:MARKer[
1 | 2 | 3 | 4 ] : F U N C t i o n : B W I D t h
| B A N D w i d t h : Y: R E F e r e n c e ?
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:FUNCtion:DELTa:RESet
Sets the reference for the delta marker to the current position of the delta
marker.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : F U N C t i o n : D E LTa
: R E S e t
Related
Commands
: C A L C u l a t e
[1|2|3|4|5|6]:MA
R K e r [ 1 | 2 | 3 | 4 ] : F U N C t i o n : D E LTa O N | O F F
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
