6-54
Programming Commands
CALCulate Subsystem Commands
off will turn off any marker function that was on for that particular marker.
When the marker is turned on again, all the marker functions for that marker
will be off.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] [ : S TATe ] O F F | O N | 0 | 1
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] [ : S TATe ] ?
Related Keys
Active Marker 1|2|3|4|OFF
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:TRACe
Places the marker on a particular trace.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : T R A C e
T R A | T R B | T R C | T R D | T R E | T R F
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : T R A C e ?
Related Key
(Marker) ActiveTrace A|B|C|D|E|F
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:X?
Returns the X-axis value of the normal marker.
When the delta function is on, the absolute X-axis value of the delta marker is
returned. When the bandwidth function is
ON
, the X-axis value of the center
marker is returned.
The units of the value returned by the query is determined by the
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:X:READout state. For READout of
FREQuency, the units returned are in Hertz. For READout of WAVelength, the
units returned are meters. For READout of TIME, the units are in seconds.
Sending the query when the specified marker is off will generate a “Settings
conflict” error.
Syntax
: C A L C u l a t e [ 1 | 2 | 3 | 4 | 5 | 6 ] : M A R K e r [ 1 | 2 | 3 | 4 ] : X ?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
