manualshive.com logo in svg

Agilent Technologies All, Catalog

The Lexmark All is an innovative and versatile device designed to simplify your document management. To ensure smooth operation, it is essential to have the Quick Reference Manual at your fingertips. Download this comprehensive manual for free from our website, 88.208.23.73:8080, and optimize your Lexmark All experience today.

Share
Download
background image

175

3

Calibration
Kits
Verification 
Kits

English URL 

www.agilent.com/find/products

Analyzer Accessories

Network Analyzers

Calibration Kits

Error-correction procedures require that the systematic errors in the
measurement system be characterized by measuring known devices
(standards) on the system over the frequency range of interest.
Agilent Technologies offers two types of calibration kits: mechanical
and electronic. For further information about these products, please
refer to the following web site 

www.agilent.com/find/accessories

or

www.agilent.com/find/nacal

Mechanical Calibration Kits

All network analyzer, coaxial mechanical calibration kits contain stan-
dards to characterize systematic errors. Many mechanical calibration
kits also contains adapters for test ports and a torque wrench for
proper connection. Mechanical calibration kits are divided into three
categories: economy, standard, and precision. Economy kits include a
fixed load. Standard kits include a sliding load or a series of offset
shorts. Precision kits contain TRL devices.

Electronic Calibration (ECal) Modules

Electronic calibration (ECal) is a precision, single-connection, 1-, 
2-, or 4-port calibration technique that uses fully traceable and veri-
fiable electronic calibration modules. ECal provides repeatable,
accurate measurements while bringing convenience and simplicity
to your daily calibration routine. ECal replaces the traditional cali-
bration technique that uses mechanical standards. With mechanical
standards, you are required to make numerous connections to the
test ports for a single calibration. These traditional calibrations
require intensive operator interaction, which is prone to errors.
ECal modules consist of a connector-specific calibration standard.
Modules are available with 3.5 mm, 7 mm, Type-N, Type-F, 2.92 mm,
2.4 mm, 1.85 mm and 7-16 connectors. Options exist for 2-port 
modules with one male and one female connector (MOF), two male
(00M) or two female (00F) connectors. Four-port ECal modules 
support both mixed-sex and mixed-connector-type configurations.
In addition to the standard factory characterizations of these con-
nector configurations, users can characterize their ECal modules
with adapters on the test ports. The resulting user-characterization
data can then be saved into user memories within the ECal modules. 
The adapters can serve as “connector savers” or be used to change
connector type or connector sex, giving maximum calibration 
flexibility. The user-characterization feature can also bring the 
convenience of ECal to fixture and wafer-probe environments.

The PNA and ENA Series of network analyzers can control

ECal modules directly using a USB connection. 8753 and 8720 
network analyzers control ECal modules via the 85097B VNA 
interface kit. For more information, refer to the ECal Product
Overview (literature number 5963-3743E).

PC Interface Module with Control Software

The 85097B consists of a VNA interface module, and power supply.
The interface module is the interface between the parallel port on
your 8753 or 8720 network analyzer, the ECal module, and the exter-
nal power supply. The 85097B interfaces with the 8753E/ET/ES, the
8719D/ET/ES, the 8720D/ET/ES and the 8722D/ET/ES network
analyzers.

Mechanical Verification Kits

Measuring known devices, other than the calibration standards, is a
way of verifying that the network analyzer system is operating prop-
erly. Agilent offers verification kits that include precision airlines,
mismatch airlines, and precision fixed attenuators. Traceable mea-
surement data, on disk, is shipped with each kit. Verification kits
may be recertified by Agilent Technologies. This recertification
includes a new measurement of all standards and new data with
uncertainties.

Summary of Contents for All
































































































































































































































Reviews:

No comments

Related manuals for All

Panasonic PV-V4524S Service Manual preview
PV-V4524S
Brand: Panasonic Pages: 72
Panasonic KW9M Eco-Power Meter Installation Instructions preview
KW9M Eco-Power Meter
Brand: Panasonic Pages: 2
Banner QS30LLP Quick Start Manual preview
QS30LLP
Brand: Banner Pages: 11
Bante Instruments DDS-12DW User Manual preview
DDS-12DW
Brand: Bante Instruments Pages: 10
BANTE POL-200 Instruction Manual preview
POL-200
Brand: BANTE Pages: 11
Banner Q5X Manual preview
Q5X
Brand: Banner Pages: 14
Banner Q5X Quick Start Manual preview
Q5X
Brand: Banner Pages: 16
Danfoss EKC 201 Manual preview
EKC 201
Brand: Danfoss Pages: 6
Laserworld GREEN-3000 Manual preview
GREEN-3000
Brand: Laserworld Pages: 4
Laserworld GREEN-12000 Manual preview
GREEN-12000
Brand: Laserworld Pages: 4
Laserworld GREEN-150E Manual preview
GREEN-150E
Brand: Laserworld Pages: 4
LaserLiner SensoLite 120 Quick Start Manual preview
SensoLite 120
Brand: LaserLiner Pages: 56
Lasermet ICS-6 Wiring Manual preview
ICS-6
Brand: Lasermet Pages: 8
National Instruments NI 9421 Getting Started Manual preview
NI 9421
Brand: National Instruments Pages: 18
Unior 270 A Operating Instructions preview
270 A
Brand: Unior Pages: 2
Vaisala HUMICAP HM70 User Manual preview
HUMICAP HM70
Brand: Vaisala Pages: 83
velocomp PowerPod Procedure preview
PowerPod
Brand: velocomp Pages: 4
Valcom V9992 Datasheet preview
V9992
Brand: Valcom Pages: 1

Brands by name

Popular brands

Load more brands