Agilent B2901/02/11/12A Precision Source/Measure Unit
Performing a list sweep measurement
Step 1.
Press
repeatedly until Single View for Channel 1 is shown in the display.
Step 2.
Press
to edit the source function, and then select
to set the source function to the voltage
source.
Step 3.
Press
to edit the source value, and then enter 0 V to set the source value to 0 V.
Step 4.
Press
to edit the limit value, and then enter 100 mA to set the limit value to 100 mA.
Step 5.
Press
to configure the measurement parameter, and then select
to set the measurement
parameter to the current.
(1) Press Mode
(2) Press VOLTS (V)
(1) Press Source
(2) Enter Source Value
(1) Press Limit
(2) Enter Limit Value
(1) Press Measure
(2) Press AMPS (I)
