User’s and Service Guide
11
E4438C Option SP2
Safety and Regulatory Information
Safety and Regulatory Information
Introduction
Review this product and related documentation to familiarize yourself with safety
markings and instructions before you operate the instrument. This product has been
designed and tested in accordance with international standards.
Before Applying Power
Verify that the product is configured to match the available main power source. If this
product is to be powered by autotransformer, make sure the common terminal is connected
to the neutral (grounded) side of the ac power supply.
Connector Care and Cleaning
If alcohol is used to clean the connectors, the power cord to the instrument must be
removed. All cleaning should take place in a well ventilated area. Allow adequate time for
the fumes to disperse and moist alcohol to evaporate prior to energizing the instrument.
WARNING
To prevent electrical shock, disconnect the Agilent Technologies
model product from mains before cleaning. Use a dry cloth or one
slightly dampened with water to clean the external case parts. Do
not attempt to clean internally.
Statement of Compliance
This instrument has been designed and tested in accordance with IEC Publication 1010,
Safety Requirements for Electronic Measuring Apparatus, and has been supplied in a safe
condition. The instruction documentation contains information and warnings which must
be followed by the user to ensure safe operation and to maintain the instrument in a safe
condition.
Declaration of Conformity
For a copy of the manufacturer’s Declaration of Conformity for this apparatus, contact your
local Agilent Technologies office or sales representative on
Page 16
.
Shipping Instructions
You must always call the Agilent Technologies Instrument Support Center to initiate
service before retuning your instrument to a service office. See
“Contacting Agilent” on
page 16
. Always transport or ship the instrument using the original packaging if possible.
If not, comparable packaging must be used. Attach a complete description of the failure
symptoms.
Summary of Contents for E4438C
Page 1: ...Agilent Technologies E4438C Option SP2 User s and Service Guide ...
Page 2: ......
Page 6: ...iv ...
Page 8: ...Contents 2 Contents ...
