Chapter 7
173
Saving and Recalling Internal Data
Saving and Recalling Measurement Data in Binary Format
7. S
aving and Recalling
Internal Dat
a
Step 8.
In the
File name
box, type the name of the file you want to save. If you want to use the
mouse to enter the file name, use the
Keyboard
dialog box displayed when you click the
Keyboard...
button.
NOTE
When you type the file name, you do not have to type a file extension. The extension “.dat”
is automatically appended, indicating the file contains measurement data in binary format.
If you want to overwrite a previously saved file, click to select the desired file in the
Directory/File list box (the selected one is shown in reversed text). The selected file name
is then displayed in the
File name
box.
Step 9.
Click
OK
to save the data.
NOTE
To cancel saving and close the dialog box, click the
Cancel
button or the
X
button instead
of
OK
.
To recall measurement data:
Perform the following procedure to recall measurement data saved to the E4991A in binary
format.
Step 1.
Right-click to open the shortcut menu and select
Save/Recall
. Alternatively, you can just
press
.
Step 2.
Click the
Recall Data
button to open the
Recall Data
dialog box (see Figure 7-5).
Figure 7-5
Recall Data Dialog Box
Step 3.
When you recall the data from a floppy disk, insert the disk into the floppy disk drive.
Step 4.
The current directory, including the drive name, is displayed in the top box. As shown in
Table 7-3 on page 169, navigate to the directory where the file containing the measurement
data you want to recall resides.
Step 5.
In the Directory/File list box, click to select the desired file. The selected file is displayed
in the reversed text.
NOTE
A file saved in binary format has the extension “.dat”.
Step 6.
Click
OK
to recall the data.
NOTE
To cancel recalling and close the dialog box, click the
Cancel
button or the
X
button
Summary of Contents for E4991A
