314
7
SCPI Command Reference
:SENSe:SP[1-1]:CARRier:FBANd
Equivalent key
SP Menu -> Average/BW -> RBW
:SENSe:SP[1-1]:CARRier:FBANd
Syntax
:SENSe:SP[1-1]:CARRier:FBANd {LOW|HIGH}
:SENSe:SP[1-1]:CARRier:FBANd?
Description
Sets/Reads the carrier frequency band
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off, or with
the downconverter on and the RF input is set to 'E5052A Direct'
When the downconverter is turned on and the RF input is set to 'Downconverter'
Equivalent key
SP Menu -> Start/Center -> Carrier To -> Frequency Band
SP Menu -> Stop/Span -> Carrier To -> Frequency Band
:SENSe:SP[1-1]:CARRier:SET:CENTer
Syntax
:SENSe:SP[1-1]:CARRier:SET:CENTer <numeric>
Description
Changes the center frequency to N times the carrier frequency (No Query)
Parameter
Preset value
25k
Unit
Hz
Resolution
-
<Numeric>
Description
LOW
Set the carrier frequency band to '10M - 1.5GHz'
HIGH(Preset
value)
Set the carrier frequency band to '300M - 7GHz'
<Description>
BAND3(Preset
value)
Set the carrier frequency band to '3G - 7GHz'
BAND4
Set the carrier frequency band to '9G - 26.5GHz'
<Numeric>
Range
1 to 20
Summary of Contents for E5052A
