7
335
SCPI Command Reference
:SOURce:VOLTage:CONTrol:AFC:FBANd
7. SCPI Command
Re
fe
re
nc
e
Equivalent key
FP Menu -> Start/Center -> DC Power Stop
FP Menu -> Stop/Span -> DC Power Stop
:SOURce:VOLTage:CONTrol:AFC:FBANd
Syntax
:SOURce:VOLTage:CONTrol:AFC:FBANd {LOW|HIGH}
:SOURce:VOLTage:CONTrol:AFC:FBANd?
Description
Sets/Reads the frequency band in the auto frequency control function
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off
When the downconverter is turned on and the RF input is set to 'E5052A Direct'
When the downconverter is turned on and the RF input is set to 'Downconverter'
Equivalent key
PN Menu -> DC Control Voltage -> Auto Freq Control -> Freqency Band
SP Menu -> DC Control Voltage -> Auto Freq Control -> Freqency Band
FP Menu -> DC Control Voltage -> Auto Freq Control -> Freqency Band
TR Menu -> DC Control Voltage -> Auto Freq Control -> Freqency Band
Unit
V
Resolution
1m
<Numeric>
Description
LOW
Set the frequency band in the auto frequency control function to
'10M-1.5GHz'
HIGH(Preset
value)
Set the frequency band in the auto frequency control function to
'300M-7GHz'
<Description>
LOW
Set the frequency band in the auto frequency control function to
'10M-1.5GHz'
HIGH(Preset
value)
Set the frequency band in the auto frequency control function to
'300M-3GHz'
<Description>
BAND3(Preset
value)
Set the frequency band in the auto frequency control function to
'3G-10GHz'
BAND4
Set the frequency band in the auto frequency control function to
'9G-26.5GHz'
Summary of Contents for E5052A
