138
7
SCPI Command Reference
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:DATA
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent
:DATA
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:DATA <array>
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:LOWer:SEGMent:DATA?
Description
Sets/Reads segment data of the lower limit line
Parameter
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:REPort[:DATA]
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit:REPort[:DATA]
Description
Reads the limit test results of all measurement points in selected traces (Query Only)
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit[:STATe]
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit[:STATe] {ON|OFF|1|0}
:CALCulate:PN[1-1]:TRACe[1-1]:LIMit[:STATe]?
Description
Turns on/off the limit test function
Parameter
Equivalent key
PN Menu -> Display -> Limit Test -> Limit Test
<Description>
Range
1...400
Preset value
-
Unit
-
Resolution
-
Description
ON or 1
Turn on the limit test function mode
OFF or 0(Preset
value)
Turn off the limit test function mode
Summary of Contents for E5052A
