148
7
SCPI Command Reference
:CALCulate:PN[1-1]:TRACe[1-1]:SPURious:THReshold:TABLe:DATA
:CALCulate:PN[1-1]:TRACe[1-1]:SPURious:THReshold:T
ABLe:DATA
Syntax
:CALCulate:PN[1-1]:TRACe[1-1]:SPURious:THReshold:TABLe:DATA <array>
:CALCulate:PN[1-1]:TRACe[1-1]:SPURious:THReshold:TABLe:DATA?
Description
Sets/Reads the threshold data
Parameter
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:SP[1-1]:ALLTrace:LIMit:FAIL
Syntax
:CALCulate:SP[1-1]:ALLTrace:LIMit:FAIL
Description
Reads out the limit test result (Query Only)
Parameter
When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:SP[1-1]:ALLTrace:MARKer:COUPle:STATe
Syntax
:CALCulate:SP[1-1]:ALLTrace:MARKer:COUPle:STATe {ON|OFF|1|0}
:CALCulate:SP[1-1]:ALLTrace:MARKer:COUPle:STATe?
Description
Turns on/off marker coupling function
<Description>
Range
1...60
Preset value
-
Unit
-
Resolution
-
Description
ON or 1
The limit test result is fail
OFF or 0(Preset
value)
The limit test result is pass
Summary of Contents for E5052A
