7
149
SCPI Command Reference
:CALCulate:SP[1-1]:ALLTrace:MARKer:DISCrete:STATe
7. SCPI Command
Re
fe
re
nc
e
Parameter
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:SP[1-1]:ALLTrace:MARKer:DISCrete:STATe
Syntax
:CALCulate:SP[1-1]:ALLTrace:MARKer:DISCrete:STATe {ON|OFF|1|0}
:CALCulate:SP[1-1]:ALLTrace:MARKer:DISCrete:STATe?
Description
Sets/Reads marker movement (Continuous/Discrete)
Parameter
Equivalent key
SP Menu -> Marker -> More Functions -> Discrete
:CALCulate:SP[1-1]:ALLTrace:MARKer:REFerence:NUM
Ber
Syntax
:CALCulate:SP[1-1]:ALLTrace:MARKer:REFerence:NUMBer <numeric>
:CALCulate:SP[1-1]:ALLTrace:MARKer:REFerence:NUMBer?
Description
Sets/Reads marker reference number
Parameter
Equivalent key
SP Menu -> Marker -> More Functions -> Ref Marker
Description
ON or 1
Set marker coupling function mode to 'ON'
OFF or 0(Preset
value)
Set marker coupling function mode to 'OFF'
Description
ON or 1
Set marker movement (Continuous/Discrete) mode to 'ON'
OFF or 0(Preset
value)
Set marker movement (Continuous/Discrete) mode to 'OFF'
<Numeric>
Range
1 to 6
Preset value
1
Unit
-
Resolution
-
Summary of Contents for E5052A
