186
7
SCPI Command Reference
:CALCulate:TR[1-1]:TRACe[1-4]:HOLD
Equivalent key
TR Menu -> Marker Function -> Analysis Type
:CALCulate:TR[1-1]:TRACe[1-4]:HOLD
Syntax
:CALCulate:TR[1-1]:TRACe[1-4]:HOLD {OFF|MAXimum|MINimum}
:CALCulate:TR[1-1]:TRACe[1-4]:HOLD?
Description
Sets/Reads trace data hold type
Parameter
Equivalent key
TR Menu -> Trace View -> Data Hold
:CALCulate:TR[1-1]:TRACe[1-4]:LIMit:FAIL
Syntax
:CALCulate:TR[1-1]:TRACe[1-4]:LIMit:FAIL
Description
Reads out the limit test result (Query Only)
Parameter
When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:TR[1-1]:TRACe[1-4]:LIMit:LOWer:LDATa
Syntax
:CALCulate:TR[1-1]:TRACe[1-4]:LIMit:LOWer:LDATa <array>
:CALCulate:TR[1-1]:TRACe[1-4]:LIMit:LOWer:LDATa?
STATistics
Set analysis type to 'Statistics'
Description
Description
OFF(Preset value)
Set data hold to 'Off'
MAXimum
Set data hold to 'Maximum'
MINimum
Set data hold to 'Minimum'
Description
ON or 1
The limit test result is fail
OFF or 0(Preset
value)
The limit test result is pass
Summary of Contents for E5052A
