246
7
SCPI Command Reference
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:RELative
Parameter
Equivalent key
SP Menu -> Display -> Meas Condition
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:RELative
Syntax
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:RELative {ON|OFF|1|0}
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:RELative?
Description
Turns on/off relative Y-scale
Parameter
Equivalent key
SP Menu -> Display -> Relative Y-Scale
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:STATe
Syntax
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:STATe {OFF|SHORt|MIDDle|LONG}
:DISPlay:SP[1-1]:GRATicule:AXIS:Y:STATe?
Description
Sets/Reads Y graticule label display
Parameter
Equivalent key
SP Menu -> Display -> Y # of Digits
Description
ON or 1(Preset
value)
Set measurement conditions mode to 'ON'
OFF or 0
Set measurement conditions mode to 'OFF'
Description
ON or 1
Set relative Y-scale mode to 'ON'
OFF or 0(Preset
value)
Set relative Y-scale mode to 'OFF'
Description
OFF
Set Y graticule label to 'OFF'
SHORt(Preset
value)
Set Y graticule label to 4 digits
MIDDle
Set Y graticule label to 8 digits
LONG
Set Y graticule label to 12 digits
Summary of Contents for E5052A
