15
1. For more detailed information about how to select impedance test accessories for the E5061B-3L5/005, refer to 5990-7033EN
2. For more detailed information about applicable DUT size of these test fixtures, refer to Accessories Selection Guide for Impedance Measurement
(5965-4792E).
3. Option 001 is the only option for the 16201A. Must choose this option when ordering the 16201A.
General accessories
Model No.
Description
Interface cables
10833A
GPIB Cable, 1 m (3.3 ft)
10833B
GPIB Cable, 2 m (6.6 ft)
10833C
GPIB Cable, 4 m (13.1 ft)
10833D
GPIB Cable, 0.5 m (1.6 ft)
10833F
GPIB Cable, 6 m (19.7 ft)
10833G
GPIB Cable, 8 m (26.2 ft)
82357B
GPIB to USB Interface:
Provides a direct connection from a USB port to GPIB port
System racks and cases
1CM015A
Rack mount kit, for use without handles: may be ordered as option 1CM
1CN005A
Front handle kit: may be ordered as option 1CN
1CP009A
Rack mount and front handle kit: may be orderd as option 1CP
E3663AC
Rack mount rail kit, for use with 5063-9216 or 5188-4430
1180CZ
Testmobile Scope Cart
Impedance test accessories
1, 2
Model No.
Description
Terminal adapter and calibration kit
Mechanical calibration kits
16201A
7 mm terminal adapter kit
16201A-001
3
7 mm terminal adapter kit for E5061B
16195B
7 mm calibration kit (open/short/load, and low-loss capacitor)
85031B
7 mm calibration kit (open/short/load)
7 mm test fixtures
16092A
Test fixture, 500 MHz, for SMD and leaded DUT
16192A
SMD test fixture, 2 GHz
16196A/B/C/D
SMD test fixture, 3 GHz
16197A
SMD test fixture, 3 GHz
4-terminal-pair test fixtures
16047E
Test fixture, for leaded DUT
16034E/G/H
SMD test fixture
