manualshive.com logo in svg

Agilent Technologies E5070B, User Manual

The Agilent Technologies E5070B User Manual is an essential resource for optimizing the performance of this versatile product. Download the comprehensive manual for free from 88.208.23.73:8080 to effortlessly navigate through the various features and configurations, ensuring maximum productivity and efficiency.

Share
Download
background image

Contents

 

9

1. Precautions

Software Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Before contacting us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2. Overview of Functions

Front Panel: Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

1. Standby Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2. LCD Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3. ACTIVE CH/TRACE Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4. RESPONSE Block  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5. STIMULUS Block  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6. Floppy Disk Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7. NAVIGATION Block  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8. ENTRY Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
9. INSTR STATE Block  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
10. MKR/ANALYSIS Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11. Test Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
12. Front USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
13. Ground Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Screen Area: Names and Functions of Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

1. Menu Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2. Data Entry Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3. Softkey Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4. Instrument Status Bar  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5. Channel Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Rear Panel: Names and Functions of Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

1. Handler I/O Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
2. Ethernet Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3. External Monitor Output Terminal (Video). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4. GPIB Connector  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5. External Trigger Input Connector (Ext Trig)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6. Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
7. Line Switch (Always ON). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8. Power Cable Receptacle (to LINE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
9. High Stability Frequency Reference Output Connector (Ref Oven, Option 1E5 only) . . . . . . . . . . . . 56
10. External Reference Signal Input Connector (Ref In)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
11. Internal Reference Signal Output Connector (Ref Out)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
12. Serial Number Plate  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
13. Certificate of Authenticity Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
14. Rear USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
15. Reserved Port (Reserved) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
16. Printer Parallel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
17. Mini-DIN Keyboard Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
18. Mini-DIN Mouse Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
19. USB (USBTMC) Interface Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

3. Setting Measurement Conditions

Initializing Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Summary of Contents for E5070B


































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for E5070B

Omicron DANEO 400 User Manual preview
DANEO 400
Brand: Omicron Pages: 80
E+E Elektronik EE772 Manual preview
EE772
Brand: E+E Elektronik Pages: 32
TC Electronic Clarity M User Manual preview
Clarity M
Brand: TC Electronic Pages: 20
horiba F-7X BW Command Reference Manual preview
F-7X BW
Brand: horiba Pages: 27
OHAUS MB45 Instruction Manual preview
MB45
Brand: OHAUS Pages: 71
Oceanic Datamask Quick Start Manual preview
Datamask
Brand: Oceanic Pages: 64
Parker SensoControl ServiceJunior Operating Instructions Manual preview
SensoControl ServiceJunior
Brand: Parker Pages: 18
janitza MRG 512 PQ Flex Operation Manual preview
MRG 512 PQ Flex
Brand: janitza Pages: 9
Vega INFO-1 Operating Manual preview
INFO-1
Brand: Vega Pages: 24
Teledyne Analytical Instruments 3110XL Operating Instructions Manual preview
3110XL
Brand: Teledyne Analytical Instruments Pages: 44
LOVATO ELECTRIC DME D300T2 MID Instruction Manual preview
DME D300T2 MID
Brand: LOVATO ELECTRIC Pages: 8
Autonics MP5M Series Product Manual preview
MP5M Series
Brand: Autonics Pages: 6
Extech Instruments PQ3350 User Manual preview
PQ3350
Brand: Extech Instruments Pages: 45
Kreg 25647 Instructional Manual preview
25647
Brand: Kreg Pages: 16
Smart Witness CP4-NA-LTE Installation Manual preview
CP4-NA-LTE
Brand: Smart Witness Pages: 19
Roland Aerophone Go Owner'S Manual preview
Aerophone Go
Brand: Roland Pages: 16
Solar Data Systems Solar-Log 10 Installation Manual preview
Solar-Log 10
Brand: Solar Data Systems Pages: 36
Banner WORLD-BEAM QS18 Quick Start Manual preview
WORLD-BEAM QS18
Brand: Banner Pages: 4

Brands by name

Popular brands

Load more brands