Installing the E5810B2
E5810B User’s Guide
39
Verifying communication from the PC
After you have configured the remote interface instruments,
verify the communication between the PC and the remote
interface instruments by using Agilent Interactive IO.
1
Launch
Agilent Connection Expert
from the Start menu or the
Start Screen (Windows 8).
2
Right- click on the remote interface instrument and select
Send Commands To This Instrument
to display the
Agilent
Interactive IO
dialog box.
3
Use the default command,
*IDN?
and select
Send & Read
to
query the connected instrument.
4
The remote interface instrument identification information
will appear on the
Instrument Session History
as shown in
Figure 2- 13
.
5
To send other commands, select
Commands>
to select from
a list of common commands, or type a command into the
Command:
line.
Figure 2-13
Agilent Interactive IO
N O T E
You can also verify the communication between the PC and the remote
interface instruments using the E5810B Web access as shown in
“Verifying Instrument Communication”
on page 31.
Summary of Contents for E5810B
