11
Save and Recall Files
Save current settings and calibration, trace data (CSV)
and .SNP), or a picture of the FieldFox screen.
Press
Save/Recall 9
1.
Then
Select Device
to set the
LOCATION
where
the file is to be saved. Choose from the following:
Internal
Saves/Recalls files to or from the
FieldFox internal memory.
SD Card
Saves/Recalls files to or from the mini
SD card.
USB
Saves/Recalls files to or from a USB Flash
drive.
2.
Then
File Type
State
Saves ALL FieldFox instrument settings
and calibration for ALL Modes to an *.sta file.
Trace + State
Saves the current trace (all traces
in SA mode) and instrument settings to an *.sta
file.
Picture
Saves the FieldFox screen to a *.png file.
Data (S1P)
Saves
CAT
and
NA
Mode trace data to
an *.S1P file. (
Data (S2P
) for NA mode only.)
Data (CSV)
Saves trace data from the current
mode to a *.csv file.
3.
Then press
Save
to save the specified
file type
to
the specified
device location
.
4.
Press
Recall
to read an *.sta file into the FieldFox.
