134
1100 Series WS MWS Reference Manual
4
Repairing the Sampler
Sampling Unit
Removing the sampling unit
1
In the user interface start the maintenance mode and select the “Change
Needle/Seat” function.
2
Switch off the sampler at the main power switch. Remove the power cable.
3
Remove the top cover, top plate, and foam (see
4
Remove the plate tray from the tray base.
5
Remove the transport assembly, (see
“Removing the sample transport"
6
On the injection valve remove the capillaries coming from the pump (port 1)
and going to the column compartment (port 6), (Use a 1/4 inch wrench if
you remove a SST capillary or a 4 mm wrench if you remove a fused silica
capillary).
7
Slide the sampling unit and tray base back to disengage the sampling-unit
connector.
8
Lift the sampling unit and tray base approximately 10 cm. Slide the leak
sensor out of the leak plane.
9
Lift the sampling unit and tray base out of the sampler.
10
Turn the tray-base locking screw ¼-turn anti-clockwise.
11
Slide the tray base back to disengage the tray base from the sampling unit.
When required
When sampling unit defective.
Tools required
1/4 inch-5/16 inch wrench 8710-0510 (supplied in accessory kit)
4 mm open end wrench 8710-1534 (supplied in accessory kit)
Pozidrive screwdriver
Flat-head screwdriver (if interface board installed)
Parts required
G1367-60008 Sampling unit
for the G1367A/68A samplers
G1377-60008 Sampling unit
for the G1377A/78A samplers
(the assy comes without injection valve and analytical head)
Summary of Contents for G1367A
