6
Quiet Cover DS User Information
1
Introduction
General Information
The Quiet Cover DS conforms to the International
Electrotechnical Commission (IEC) 61010–1 safety standard.
It also conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency
Interference (RFI):
•
CISPR 11/EN 55011: Group 1, Class A
•
IEC/EN 61326
•
AUS/NZ
This ISM device complies with Canadian ICES- 001. Cet
appareil ISM est conforme a la norme NMB—001 du Canada.
The Quiet Cover DS is designed and manufactured under a
quality system registered to ISO 9001.
Information
The Agilent Technologies Quiet Cover DS meets the following
IEC classifications: Category II, Pollution Degree 2, Class III.
Quiet Cover DS has been designed and tested in accordance
with recognized safety standards and is designed for use
indoors. If it is used in a manner not specified by the
manufacturer, the protection provided by the instrument may
be impaired. Whenever the safety protection of the Quiet
Cover DS has been compromised, disconnect it from all
power sources and secure it against unintended operation.
Refer servicing to qualified service personnel. Substituting
parts or performing any unauthorized modification to the
instrument may result in a safety hazard.