270
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
5
Commands by Subsystem
:FUNCtion:GOFT:SOURce1
Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to the FFT, INTegrate,
DIFFerentiate, or SQRT functions.
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {1 | 2 | 3 | 4} for the 4ch models
<n> ::= {1 | 2} for the 2ch models
See Also
•
"Introduction to :FUNCtion Commands"
•
•
Summary of Contents for InfiniiVision 7000A Series
