40
6000 Series Oscilloscope User’s Guide
1
Getting Started
To establish a point-to-point LAN connection
Stand-alone connection to a PC
The following procedure describes how to establish a
point-to-point (stand alone) connection to the oscilloscope. This
is useful if you want to control the oscilloscope using a laptop
computer or a stand-alone computer.
1
Install Agilent I/O Libraries Suite from the CD that was
supplied with the oscilloscope. If you do not have the CD you
can download the I/O Libraries Suite from
www.agilent.com/find/iolib.
2
Connect your PC to the oscilloscope using a cross-over LAN
cable. (The 5061-0701 LAN crossover cable is supplied with
6000L Series oscilloscopes.)
3
Switch on the oscilloscope power. Wait until the LAN
connection is configured:
•
On 6000A Series oscilloscopes, press
Utility
&
I/O
and wait
until the LAN status shows “configured”.
•
On 6000L Series oscilloscopes, the LAN indicator
illuminates green when the LAN connection is configured.
This may take a few minutes.
4
Start the Agilent Connection Expert application from the
Agilent I/O Libraries Suite program group.
5
When the Agilent Connection Expert application is
displayed, select
Refresh All
.
6
Right Click
LAN
and select
Add Instrument
.
7
In the Add Instrument window, the LAN line should be
highlighted; select
OK
.
8
In the LAN Instrument window, select
Find Instruments…
9
In the Search for instruments on the LAN window,
LAN
and
Look up hostnames
should be checked.
10
Select the
Find Now
key. (NOTE: It may take up to three
minutes before the instrument is found. If the instrument is
not found the first time, wait about one minute and try
again.)
Summary of Contents for InfiniiVision DSO6014L
