68
6000 Series Oscilloscope User’s Guide
2
Front-Panel Controls
6. Vertical Position Control
Use this knob to change the
channel’s vertical position on the display. There is one Vertical
Position control for each channel. See
7. Channel On/Off Key
Use this key to switch the channel on or
off, or to access the channel’s menu in the softkeys. There is one
Channel On/Off key for each channel. See
8. Math Key
The Math key provides access to FFT (Fast Fourier
Transform), multiply, subtract, differentiate, and integrate
functions. See
9. Vertical Sensitivity
Use this knob to change the vertical
sensitivity (gain) of the channel. See
10. AutoProbe Interface
(Not available on 100 MHz bandwidth
models.) When you connect a probe to the oscilloscope, the
AutoProbe Interface attempts to determine the type of probe
and set its parameters in the Probe menu accordingly. See
. Note: Although the 100 MHz models lack the AutoProbe
interface, they do have a probe sense ring around the BNC.
Therefore, the probe attenuation factor will be automatically set
when you connect a compatible probe such as the 10073C or
10074C.
11. Channel Input BNC Connector
Attach the oscilloscope probe
or BNC cable to the BNC connector. This is the channel’s input
connector.
12. Label Key
Press this key to access the Label menu, which
lets you enter labels to identify each trace on the oscilloscope
display. See
13. File Keys
Press the File key to access file functions such as
save or recall a waveform or setup. Or press the Quick Print key
to print the waveform from the display. See
Summary of Contents for InfiniiVision DSO6014L
