2
Installation Manual
Notices
© 2003 Agilent Technologies UK Limited
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies UK Limited as governed by
international copyright laws.
Manual Part Number
J7230-90064
Edition
First edition, December 2003
Printed in UK
Agilent Technologies UK Limited
Data Networks Division
South Queensferry, West Lothian, Scotland
EH30 9TG
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed without notice in future editions.
Further, to the maximum extent permitted
by applicable law, Agilent Technologies
disclaims all warranties of merchantabil-
ity and fitness for a particular purpose.
Agilent Technologies shall not be liable for
errors or for incidental or consequential
damages in connection with the furnish-
ing, use, or performance of this document
or of any of the products to which it per-
tains. Should Agilent Technologies have a
written contract with the user and should
any of the contract terms conflict with
these terms the contract terms shall con-
trol.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcon-
tract, Software is delivered and licensed as
“Commercial computer software” as
defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in FAR
2.101(a) or as “Restricted computer soft-
ware” as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or disclo-
sure of Software is subject to Agilent Tech-
nologies’ standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
C A U T I O N
A
CAUTION
notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION
notice until the indicated
conditions are fully understood and
met.
WA R N I N G
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
Sales and Service Offices
An up-to-date list of Agilent Offices is avail-
able through the Agilent Website at URL:
http://www.agilent.com
Installation.book Page 2 Monday, January 12, 2004 1:13 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
