Agilent Technologies L4400 Series Quick Reference Download

Page: 7 / 15

Monitor Commands

ROUTe:MONitor:DATA?

ROUTe:MONitor:STATe {OFF|0|ON|1}
ROUTe:MONitor:STATe?

ROUTe:MONitor[:CHANnel] (@<

channel>)

ROUTe:MONitor[:CHANnel]?

ROUTe:MONitor[:CHANnel]:ENABle {OFF|0|ON|1}, (@<

ch_list>)

ROUTe:MONitor[:CHANnel]:ENABle? (@<

ch_list>)

Scan Configuration Commands

ABORt

INITiate

FORMat:BORDer {NORMal|SWAPped}
FORMat:BORDer?

FORMat:DATA {ASCii,9|REAL,32|REAL,64}

FORMat:READing:ALARm {OFF|0|ON|1}
FORMat:READing:ALARm?

FORMat:READing:CHANnel {OFF|0|ON|1}
FORMat:READing:CHANnel?

FORMat:READing:TIME {OFF|0|ON|1}
FORMat:READing:TIME?

FORMat:READing:TIME:TYPE {ABSolute|RELative}
FORMat:READing:TIME:TYPE?

FORMat:READing:UNIT {OFF|0|ON|1}
FORMat:READing:UNIT?

READ? (@<ch_list>)

ROUTe:CHANnel:ADVance:SOURce <

source>

ROUTe:CHANnel:ADVance:SOURce?

ROUTe:CHANnel:DELay {<

seconds>|MIN|MAX|DEF}, (@<ch_list>)

ROUTe:CHANnel:DELay? [{MIN|MAX}, ] (@<

ch_list>)

ROUTe:CHANnel:FWIRe <

mode>, (@<ch_list>)

ROUTe:CHANnel:FWIRe? (@<

ch_list>)

ROUTe:SCAN (@<

scan_list>)

ROUTe:SCAN?

ROUTe:SCAN:ADD (@<

ch_list>)

ROUTe:SCAN:REMove (@<

ch_list>)

ROUTe:SCAN:ORDered {OFF|0|ON|1}
ROUTe:SCAN:ORDered?

ROUTe:SCAN:SIZE?

SWEep:COUNt {<

count>|MIN|MAX|DEF}

SWEep:COUNt? [{MIN|MAX}]

Summary of Contents for L4400 Series
















Search results

Summary of Contents for L4400 Series

Reviews:

Related manuals for L4400 Series

Brands by name

Popular brands

Agilent Technologies L4400 Series, Quick Reference

Search results

Summary of Contents for L4400 Series

Reviews:

Related manuals for L4400 Series

Brands by name

Popular brands