L4411A Getting Started Guide
51
L4411A Software Installation and Configuration
2
Adding Instruments to the USB Configuration
With the L4411A connected to the PC through the USB cable, start Agilent
Connection Expert. Right-click the USB interface (USB0) and then select
“Refresh This Interface” (Figure 2-14).
Figure 2-14. Adding the L4411A to the USB Interface.
Connection Expert will attempt to establish a communication path to the
instrument. If successful, the instrument will be added to the list of USB
configured instruments (Figure 2-15).
select to add
instrument
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
