2
General Power Meter Functions
102
N1913/1914A EPM Series Power Meters User’s Guide
Setting the Cable Short/Long
When connecting the power sensor with Agilent 11730F power sensor
cable, 61 m (200 ft), you are required to change the cable setting from
Short
(default setting) to
Long
, or an error will occur when the power
sensor is connected.
To access the cable setting,
1
Press
,
and select
.
2
In the
Service
menu, press
and select
to toggle
between the short or long cable option.
The
LCB
indicator will appear in blue at the bottom of the display to
indicate that the long cable option is selected as shown in
.
Figure 2-67
Short/long cable option
1 of 2
Service
1 of 2
Cable Short/Long
