N5101-90001 7
3.
Ensure that the metal shielding bracket of the PCI card slips into the PCI slot at the front of the case. If it does not
fit, refer to step 4.
4.
For ISA-compliant computer cases, attach the metal extender bracket to the PCI card shielding using the two
screws provided. See the illustration below. The extender will slip into the guides at the front of the ISA-compliant
PC case as shown in the illustration above.
5.
Secure the rear of the PCI board (the end with the digital bus connector) to the PC chassis with a mounting screw.
6.
Reconnect the AC power cable.
7.
If the LAN/GPIB was disconnected, reconnect it.
PCI Slots
near the front
of the PC
Screw
Card Shielding
Extender
