N5101-90001 5
Signal Source Requirements
The PC and signal sources must be connected via LAN or GPIB.
Table 3
N5110B Baseband Studio for Waveform Capture and Playback
Processor
Pentium III, 800 MHz or greater
Memory (RAM)
256 MB minimum
Free Disk Space
200 MB minimum
Available PCI Slots
One 32 bit/33 MHz and one additional PCI slot opening
Operating System
Windows XP Professional, SP 1 or greater -or- Windows 2000 Professional, SP 3 or greater
Table 4
N5115A Baseband Studio for Fading
Processor
Pentium III, 600 MHz or greater
Memory (RAM)
256 MB minimum
Free Disk Space
145 MB minimum
Available PCI Slots
Single-Channel Configuration: One 32 bit/33 MHz and one additional PCI slot opening
Dual-Channel Configuration: Two 32 bit/33 MHz and two additional PCI slot openings
Operating System
Windows XP Professional, SP 1 or greater -or- Windows 2000 Professional, SP 3 or greater
Table 5
Requirements for Signal Sources
Application
Source Model
Source Firmware Revision
Source Options
Interface
N5110B Baseband Studio
for waveform capture and
playback
E8267D
C.04.04
601 or 602
LAN or GPIB
E8767C
C.03.78 or later
602
LAN or GPIB
E4438C
C.03.74 or later
601 or 602
LAN or GPIB
N5110A Baseband Studio
for waveform streaming
E8267C
C.03.31 or later
602
LAN or GPIB
E4438C
C.03.30 or later
601 or 602
LAN or GPIB
N5115A Baseband Studio
for fading
E4438C
C.03.40 or later
601 or 602
LAN or GPIB
E5515C
E6702B:B.03.00 or later,
E6703C:C.01.00 or later, or
E6785C: C.01.00 or later
003
E5515CU Option 504
E5515CU Option 187
a
a. E5515CU Option 187 required for W-CDMA usage only.
GPIB only
