68
N9320A Spectrum Analyzer
4
Key Reference
Display Line
On Off
Activates an adjustable horizontal line that is used as a
visual reference line. The line, which can be used for trace
arithmetic, has amplitude values that correspond to its
vertical position when compared to the reference level. The
value of the display line appears in the active function block
and on the left side of the display. Use the arrow keys,
knob, or numeric keypad to adjust the display line. Pressing
any digit, 0 through 9, on the numeric keypad brings up the
selected terminator menu.
Key access:
Limits
Accesses softkeys that allow you to create and define the
parameters of limit lines.
Key access:
Det/
Display
Limit 1
Limit 2
selects either of the available limits. The
Limit 1
and
Limit 2
keys access softkeys to set parameters for the
selected limit.
Key access:
>
Limits
Type
Upper lower
defines the limit you are editing as either
an upper or lower limit. An upper limit
fails if trace 1 exceeds the limit. A lower
limit fails if trace 1 falls below the limit.
Key access:
>
Limits > Limit 1/2
Limit
On Off
Toggles the limit line between on and off.
You need to edit the limit points before
you turn on the limit function. Either
Limit
or
Margin
, as well as
Test
, must be
turned on for a limit test.
Key access:
> Limits > Limit 1/2
Det/
Display
Det/
Display
Det/
Display
Det/
Display
Summary of Contents for N9320A
