Functions and Measurements
3
N9342C/43C/44C User’s Guide
73
List N Channel Scanner
The List N channel scan is used for listing the
frequency channels from specific channel standard
or customized frequency bandwidth.
Please refer to the procedures below to perform a
List N channel scanner measurement.
1
Connect the antenna to RF IN connector.
2
Turn on the channel scanner function.
Press
[Meas] > {Channel Scanner}
3
Press
[Meas] > {Scan Mode} > {List}
to set the scan
mode to List N channel mode. Input the channel
number you need to monitoring. Press
{Enter}
as
a terminator.
4
Press
{List Edit}
to access the submenu to edit the
scan range.
Press
{Insert}
to insert a channel and access the
channel setting submenu to customize the
channel parameters.
Press
{Edit Method Std}
. It allows you to set the
range according to the embedded communication
standard, such as CDMA and GSM which is used
specifically in different countries.
Press
{Signal Std}
to load a standard file as your
need. Please refer to
for details.
Press
{Chn ID}
to select the specific channel
according to the signal standard.
Or press
{Edit Method Custom}
. It allows you to set
the customer- defined scan as your need.
Press
{Freq}
to set the center frequency of the
current channel.
Press
{Bandwidth}
to set the bandwidth of each
frequency channel which is used to calculate the
channel power.
The first channel editing is completed. Press
{Return} > {Insert}
to add more channels as your
need.
Summary of Contents for N9342C
