Key Reference
5
N9342C/43C/44C User’s Guide
141
Limit
Limit Type
Key access:
[Limit] > {Limit Type}
Defines the limit you are editing as either an upper
or lower limit. An upper limit fails if trace 1
exceeds the limit. A lower limit fails if trace 1 falls
below the limit.
Limit Line
Key access:
[Limit] > {Limit Line}
Activates an adjustable horizontal line that is used
as a visual reference line.
The limit line, used for trace arithmetic, has
amplitude values that correspond to its vertical
position when compared to the reference level. The
value of the display line appears in both the active
function block and on the left side of the display.
The arrow keys, knob, or numeric keypad may be
used to adjust the display line. Pressing any digit,
0 through 9, on the numeric keypad brings up the
selected terminator menu. To deactivate the display
line, press
Display Line (Off)
.
Limits
Key access:
[Limit] > {Limits}
Turns on the limit pattern function and turns off
the limit line function simultaneously.
Limits Edit
Key access:
[Limit] > {Limits Edit}
Allows you to set a limit pattern for measurements.
You can edit limit points, limit table and limit
offset for your limit pattern.
Summary of Contents for N9342C
