29
Chapter 2: Unpacking and installing the workstation
BenchCel Microplate Handling Workstation R-Series User Guide
Verifying laboratory requirements
Laboratory space
General bench requirements
Make sure the bench for the BenchCel Workstation has the following:
❑
Proximity to power and air sources
❑
Enough space to accommodate the complete configuration of your
BenchCel Workstation, which includes the number and size of
stacks, computer, and external devices
❑
Sufficient clearance on the back side of the BenchCel Workstation to
access power, communication, and air tubing connections
❑
Enough strength to support the BenchCel Workstation and devices
without excessive shaking or movement
❑
A fixed position (no wheels)
❑
Proper height for any operator to comfortably operate the BenchCel
Workstation
Space requirements
The minimum space requirements for your BenchCel device depends
on its configuration and stacker rack size. The following table lists
dimensions for a BenchCel device in a two-, four-, or six-stack
configuration.
Note:
The racks listed are the standard racks supplied with the system. In
addition, the weight of the rack is of the rack alone and does not include
liquid-filled microplates. The height and weight are slightly different
with different rack types. See the Velcity11 website
at
for the height and weight information of various
rack types.
Addition of devices
If you are integrating a Velocity11 device or third-party device in your
BenchCel Workstation, make sure you include adequate space to
accommodate these devices. See the device user documentation for
space requirement information.
Dimension
Two stacks
Four stacks
Six stacks
Height
with x-short rack
with short rack
with medium rack
with tall rack
46.3 cm
68.0 cm
88.3 cm
111.2 cm
128.9 cm
46.3 cm
68.0 cm
88.3 cm
111.2 cm
128.9 cm
46.3 cm
68.0 cm
88.3 cm
111.2 cm
128.9 cm
Width
43.2 cm
86.4 cm
129.5 cm
Depth
20.3 cm
20.3 cm
20.3 cm
Weight
without rack
with tallest rack
21.8 kg
25.2 kg
28.1 kg
38.7 kg
32.7 kg
52.2 kg
Summary of Contents for R Series
