SureScan System User Guide
31
All slides in the slot table with a State of
Ready for queue
are added to the queue, in the order
they appear in the slot table.
To move a slide in the queue
1
In the slot table, click the State cell for the slide you want to move.
2
Click again to show selections for the slide.
3
Click one of the following possible options to move the slide position in the queue:
Move to first
— Move the slide to the first position
Move to last
— Move the slide to the last position
Move up
— Move the slide up one position
Move down
— Move the slide down one position
To remove a slide from the scan queue
1
In the slot table, click the State cell for the slide you want to remove from the queue.
2
Click again to show selections for the slide.
3
Click
Remove from queue
.
The slide is removed from the queue and its State changes to
Ready for queue
.
To remove all slides from the scan queue
1
In the Scan Control main window, click
Empty Queue
.
A confirmation dialog box opens.
2
Click
Yes
.
All queued slides are removed from the queue, and the State changes to
Ready for queue
.
To open the scanner door
•
In the Scan Control main window, click
Open Door
.
NOTE
You must use the Scan Control program to open the scanner door.
You cannot open the door while the scanner is loading or ejecting a slide.
