SureScan System User Guide
34
4
When you are finished changing the settings, add the slides to the queue. See
“To add all slides to the queue”
To add a description for the slide
1
In the slot table, select the slide whose settings you want to change.
2
In the Scan Description area, type the desired information about the slide and scan.
3
When you are finished typing the description, click the State cell and add the slide to the queue.
(See
“To add a slide to the scan queue”
To add a user name
You can only change the user name for a slide when it is not in the scan queue. See
1
In the slot table, select the slide whose settings you want to change.
2
In the User area, type user information.
3
When you are finished typing the user, click the State cell and add the slide to the queue. (See
“To add a slide to the scan queue”
NOTE
You can only change the slide scan description for a slide when it is not in the
scan queue. See