SureScan System User Guide
83
Height
Height of the scan region measured from the end of the Y-axis measurement in the upper left
corner.
Chip Package
A chip package describes the maximum size of the scan region for slides of a designated type.
This read-only area displays the default scan region for the selected chip package. There are two
types of chip packages; Full Agilent for Agilent slides with barcode labels, and Full Standard for
slides without barcode labels.
Save
Saves the current scan region values in the current slide scan region. This button is unavailable if
the scan region is an Agilent defined scan region or if it is used in an existing scan protocol.
Save As
Opens the Save As New Name dialog box, where you can save the current scan region with a new
name.
Remove
Removes the selected scan region. This button is unavailable if the scan region is an Agilent
defined scan region or if it is used in an existing scan protocol.
Import
Opens the Open dialog box, where you select an exported scan region file to import to the
program.
Export
Opens the Export Scan Region dialog box, where you select one or more scan regions to export.
Close
Closes the dialog box.
Self Test dialog box
Figure 31
Self Test dialog box
Purpose: Examines various scanner subsystems to check for out-of-specification behavior. After
the self test is finished, a summary of the results is opened in your internet browser. The test
results are also saved in the C:\ProgramData\Agilent\MicroArrayScanner\SelfTestReport folder.
To open: In the Scan Control program menu bar, click
Tools > Self Test
.