AGL EAGL H, Owner'S Manual

12

5.2 Tripods 

The laser can be mounted on a 5/8" - 11 flat head tripod. You
can also use a tripod with an elevating column to adjust the height
of the laser. 

5.3 Other accessories 

• Laser-enhancing glasses improve the visibility of the laser beam

in bright light conditions. 

• Red magnetic target improves the visibility of the laser beam in 

bright conditions. Quickly attaches to any metallic surface. 

• LS50R detector/remote control  functions as a detector, similar 

to the LS50, plus can be used to calibrate the laser. 
Cannot be used as a remote control with the EAGL H, except  
for calibration. 

• TL25 remote control: facilitates calibration; cannot be used as a 

remote, except for calibration.

• Universal SM200 mount: can be used as a wall mount, and with

the EAGL H+ for vertical setups on a tripod. 

THIS CHAPTER IS VERY IMPORTANT:

Here are a few simple instructions to check your

laser for calibration. The laser is a precision instrument

and it is important that you keep it calibrated

and in proper condition. The accuracy of your work is

completely your responsibility and you should check

your instrument before beginning each job, and especially

after the instrument has taken a sharp jolt or

been dropped, or when temperature changes greater

than 50 degrees F (28 degrees C) have occurred.

6. Check and Adjust