10
AGM Global Vision
2 OPERATING INSTRUCTIONS
2.1 INSTALLATION AND MOUNTING
2.1.1 BATTERY INSTALLATION
CAUTION:
Verify that the equipment is OFF before installing the batteries.
To install two CR123A batteries (refer to Figure 2-1):
1. Unscrew the battery cap (A).
2. Remove the battery cassette (B).
3. Insert the batteries (C) into the cassette. Align the polarity symbols on the batteries with the
polarity symbols on the cassette.
4. Insert the cassette with installed batteries.
5. Replace the battery cap.
2.1.2 FASTENING AN ADVANCED WIRELESS REMOTE CONTROL
Using the supplied Velcro
®
tape (A, Figure 2-2), fasten the remote control (B) to an easily accessible
place.
You can use the Picatinny adapter for the wireless remote control (C) for mounting the remote
control to Picatinny or Weaver rail. Install the adapter onto the rail (D). Insert the remote control
into the adapter.
FIGURE 2-1. BATTERY INSTALLATION
A
B
C
Summary of Contents for COBRA TB50-336
Page 1: ...USER MANUAL COBRA THERMAL IMAGING BI OCULAR...
Page 31: ......
