12
AGM Global Vision
Use the video cable plug (A, Figure 2-10) to connect an external video recorder/monitor/TV to the
Cobra. Connect the video cable plug (C) to the Cobra S620 universal connector.
Use the video cable plug (B) to connect an external power source (6 VDC / 600 mA) to the Cobra.
Connect the video cable plug (C) to the Cobra S620 universal connector.
NOTE:
The external power supply must have a standard OD double-pole socket with a positive central
contact.
CAUTION:
After removing the cable, replace the protective cap over the connector.
2.1.5 INSTALLING THE COBRA ON A TRIPOD
To mount the Cobra to a tripod, screw the tripod into the 1/4’’ threaded socket located on the
bottom of the Cobra.
CAUTION:
The unit may be badly damaged if the tripod collapses or falls over. Remove the unit from the
tripod if it is not within your reach.
2.2 CONTROLS AND DISPLAY INDICATIONS
2.2.1 CONTROLS
CAUTION:
DO NOT force the equipment controls past their stopping points.
The Cobra controls are shown in Figure 2-5 and are defined in Table 2-1. The ITEM column indicate
the numbers used to identify items in the figures.
NOTE:
Various display symbols indicating the current operating state of the Cobra can be displayed
permanently, may appear momentarily, or can be set to appear only when a certain function is
activated.
FIGURE 2-5. CONTROLS
1
2
3
4
5
Summary of Contents for COBRA TB50-336
Page 1: ...USER MANUAL COBRA THERMAL IMAGING BI OCULAR...
Page 31: ......
