AGM Global Vision COBRA TB50-336, User Manual

20

AGM Global Vision

8. Using the buttons on the control panel (Figure 2-16), configure the Cobra to adapt it to your 

situation.

For more information on operational setting procedures, see Part 2.2 (Controls and Display 

Indications).

A. Adjust the brightness of the display for your comfort.
  Push buttons (1) and (2) to increase/ decrease the display brightness by one level at a time 

until you reach your desired brightness level.

B. Use FFC (Flat Field Correction) to improve image quality.
  Push buttons (1) and (2) simultaneously to start manual Flat Field Correction.
  If necessary, interrupt the automatic process by pushing the OK button (3) on the control 

panel during the 5-second countdown, which will appear at the bottom of the display.

C. Use digital zoom to magnify the central area of the displayed scene.
  Momentarily push the zoom control button (2) to slowly magnify into the displayed scene. 

The 2x, 4x, 8x symbols (maximum zoom factor is dependent of model) will appear in the 

bottom part of the display.

NOTE:

Digital zoom allows distant objects to appear larger; however, the resolution will be compromised.

D. Use the image palettes for optimal visualization of temperature changes in the scene.
  Hold down the palette control button (2) to scroll through available palettes. The palette name 

will appear in the top part of the display.

E. Turns reticle ON/ OFF.
  Push and hold button (2) to turn reticle ON or OFF. 
F. Select the color of the reticle.
  Momentarily push the reticle color control button (4) to select among black, white, red, and 

cyan.

G. Select a reticle pattern.
  Push and hold button (4) to select from a choice of reticle patterns: Dot 4 MOA, Line Dot, 

Cross Center Dot, Cross, Crosshair.

FIGURE 2-16. SETTING BUTTONS

(1) BRIGHTNESS UP/

PALETTE (FWD)

(3) BRIGHTNESS DOWN / 

PALETTE (BWD)

(4) RETICLE COLOR / 

RETICLE PATTERN

(2) DIGITAL ZOOM / 

RETICLE ON/ OFF