22
AGM Global Vision
3 MAINTENANCE INSTRUCTIONS
3.1 OPERATOR TROUBLESHOOTING
The purpose of troubleshooting is to identify the most frequent equipment malfunctions, probable
causes, and corrective actions required.
Table 3-1 lists the common malfunctions that may be found during the operation or maintenance
of the Cobra. Perform the tests/ inspections and corrective actions in the order listed.
This table does not list all of the malfunctions that may occur with your device, or all of the tests
and corrective actions that may be necessary. If you experience an equipment malfunction that
is not listed, or is not fixed by the corrective actions listed in the table, please contact Customer
Service centre.
TABLE 3-1. OPERATOR TROUBLESHOOTING
MALFUNCTION
PROBABLE CAUSE/ TEST/
INSPECTION
CORRECTIVE ACTION
The Cobra fails to
activate.
Batteries are missing or
improperly installed.
Insert batteries or install correctly.
Batteries are dead.
Replace the batteries.
Batteries, surfaces, or contacts
are dirty or corroded.
Clean the contact surfaces with a
pencil eraser and/or alcohol and
cotton swabs.
Remote control unit is damaged.
Please contact Customer Support.
Remote control battery is dead.
Replace the battery as per Part 3.2.3.
The equipment is damaged.
Please contact Customer Support.
The Cobra is not
responsive to
control buttons.
The equipment is damaged.
Please contact Customer Support.
Remote control
does not work.
Battery is missing or improperly
installed.
Insert battery or install correctly.
Battery is dead.
Replace the battery.
Battery surfaces or contacts are
dirty or corroded.
Clean the contact surfaces with a
pencil eraser and/or alcohol and
cotton swabs.
Remote control unit is damaged.
Please contact Customer Support.
Summary of Contents for COBRA TB50-336
Page 1: ...USER MANUAL COBRA THERMAL IMAGING BI OCULAR...
Page 31: ......
