background image

4

AGM Global Vision

SAFETY SUMMARY

• 

Read and follow all instructions

• 

Read all warnings

• 

Only use the attachments/accessories specified by the manufacturer

• 

All service must be provided by the manufacturer

 WARNING: 

This product contains natural rubber latex, which may cause allergic reactions! 

The FDA has 

reported an increase in the number of deaths associated with sensitivity to natural latex proteins. 

If you are allergic to latex, learn which products contain it and strictly avoid exposure to those 

products.

CAUTION: 

•  Do not dismantle the equipment.
•  Keep the equipment clean. Protect it from moisture, dramatic temperature drops, and 

electrical shocks.

•  DO NOT force the equipment controls past their stopping points.
•  DO NOT leave the equipment activated during breaks in operation.
•  DO NOT store the equipment with the batteries installed.
•  Thoroughly clean and dry each item before placing them into the storage case.

CAUTION: 

To prevent thermal damage to the equipment, never point it, either on or off, directly at the sun 

or any other source of high intensity light that the unprotected human eye cannot tolerate (such 

as a welding arc). To prevent inadvertent exposure to these types of sources, never leave the 

equipment with the objective lens cap off.

NOTES: 

•  To avoid losing unsaved data, DO NOT remove the batteries or disconnect the external power 

source while the Cobra is on.

•  Inadvertent sun damage is not considered a defect in material or workmanship, and is therefore 

not covered in the product warranty.

Summary of Contents for COBRA TB50-336

































Reviews: