FUZION LRF
USER MANUAL
17
NOTE:
USB-CVBS cable need to be purchase separately.
NOTE:
CVBS Output function doesn’t support hot plug, so please connect the cable
before power on.
2. Hold button to show the menu.
3. Select
CVBS
menu item and press button to turn on or turn off the CVBS
video output.
2.2.9 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which are not performed as expected.
Before you start switch the palettes mode to White Hot mode.
1. Hold button to show the menu.
2. Rotate the wheel to select
DPC menu item, and press to enter the DPC
setting interface.
3. Press to switch the moving direction of the cursor, and rotate the wheel to
move the cursor until it reaches the defective pixel.
4. Press to correct the defective pixel.
NOTE:
When Holding
in the DPC interface, the menu at the bottom of the interface
can be mirrored to the top of the interface.
The selected defective pixel can be magnified and displayed at the bottom
right of the interface.
2.2.10 BURNING PREVENTION
This function can prevent damage to the thermal sensor from the sun or other
high temperature bright light source. When enabling this function, the shield
will close until the environment turns to normal.
1. Hold button to go to the menu.
2. Rotate the wheel to select menu item and press button to enable or
disable the Burn Prevention function.
NOTE:
When the burn-prevention function is disabled, the shield won’t be forced to
close in such conditions.
2.2.11 LANGUAGE SETTING
You can select different languages of user interface.
1. Hold button to show the menu.
2. Rotate the wheel to select Language menu item and press button to
select the language.
3. Rotate the wheel to select the language as required, and press to confirm.
