background image

FUZION LRF 

USER MANUAL

5

SAFETY SUMMARY

•  Read and follow all instructions
•  Read all warnings
•  Only use the attachments/accessories specified by the manufacturer
•  All service must be provided by the manufacturer

WARNING:

This product contains natural rubber latex, which may cause potentially fatal 

allergic reactions! If you are allergic to latex, it is important that you strictly 

avoid exposure to products that contain it. 

WARNINGS AND CAUTIONS:

Transportation

•  Keep the device in original or similar packaging while transporting it.
•  Keep all wrappers after unpacking them for future use. In case of any failure 

occurred, you need to return the device to the factory with the original 

wrapper. Transportation without the original wrapper may result in damage 

on the device and the company shall not take any responsibilities.

•  DO NOT drop the product or subject it to physical shock. Keep the device 

away from magnetic interference.

Power Supply

•  The battery charger and power adapter are included in the package. The 

input voltage for the supplied battery charger should meet the limited power 

source (5 VDC, 2 A).

•  Make sure the plug is properly connected to the power socket.
•  DO NOT connect multiple devices to one power adapter, to avoid over-

heating or fire hazards caused by overload.

Battery

•  Improper use or replacement of the battery may result in explosion hazard. 

Replace with the same or equivalent type only. The battery type is 18650 

with the protection board, and the battery size should be within 19 mm × 

70 mm. The rated voltage and capacity are 3.6 VDC/3.35 Ah (12.06 Wh). 

Dispose of used batteries in conformance with the instructions provided by 

the battery manufacturer.

•  For long-term storage of the battery, make sure it is fully charged every half 

year to ensure the battery quality. Otherwise, damage may occur.

•  Do not charge other battery types with the supplied charger. Confirm there 

is no flammable material within 2 m of the charger during charging.

•  DO NOT place the battery near heating or fire source. Avoid direct sunlight.
•  DO NOT swallow the battery to avoid chemical burns.
•  DO NOT place the battery in the reach of children.
•  The device can not be charged, please use the supplied charger to charge 

the battery. 

•  Please purchase the adapter by yourself. The using environment of the 

adapter should be consistent with that of the device.

Summary of Contents for FUZION LRF





























Reviews: