background image

RATTLER TS35-640/TS50-640  

USER MANUAL

25

6. Turn off the device.
7.  Turn on the device. After a while, the firmware update process will start 

automatically. During the update, the screen will display the inscription 

“Upgrading ...”. The update process will be completed when the word 

“Upgrading ...” goes out.

Repeat steps 5-7 for each updating file.

3.2  TROUBLESHOOTING

Table 3-1 lists the most common malfunctions that may occur with your 

equipment. This table does not list all the malfunctions that may occur with 

your device. If the equipment malfunction is not corrected by the suggested 

actions, or a problem occurs that is not listed in this table, please contact AGM 

Global Vision’s Customer Support center or your retailer.

8%&0)8639&0)7,338-2+

MALFUNCTION

CORRECTIVE ACTION

The scope fails 

to activate.

1. Batteries are missing or improperly installed. Insert 

batteries or install correctly.
2. Batteries are dead. Replace the batteries.
3. Batteries, surfaces or contacts are dirty or corroded. 

Clean the contact.

The scope shut 

off sometimes 

after shot.

1. Wrong battery voltage. The default is 3.0 V. If you use 

3.7V battery, switch it in the menu.
2. Improper dimension of the battery. Check if there is 

the rubber ring attached on the battery compartment.
3. Low battery level. Check the remaining capacity of 

the batteries, which may be low on power to maintain 

performance.

The image is not 

clear.

Perform the sight adjustment referring to section 2.1.

Wi-Fi is not 

found.

Examine whether the Wi-Fi function is turned on. If not, 

go to OSD menu and turn on Wi-Fi.

Capturing or 

recording fails.

1. The device is connected to your PC and has disabled 

the capturing and recording.
2. The storage space is full.
3. The device is in a low-battery condition.

The PC cannot 

identify the 

scope.

1. The device is connected to your PC with standard USB 

cable.
2. If you use other USB cables, make sure the cable 

length is no longer than 1 m.
3. The Wi-Fi function is turned on. If so, go to OSD menu 

and turn off Wi-Fi.

Summary of Contents for RATTLER TS35-640

































Reviews: