AGM Global Vision
16
NOTE:
Go to distance measurement interface, and press
to view the result of the
previous measuring target.
2.2.9 HOT TRACKING
The device can detect the highest temperature spot in the scene and mark it
on display.
1. Hold
button to show the menu.
2. Select
/
and press
button to enable/disable hot spot mark
(marking the spot of highest temperature).
When the hot spot mark is enabled, the mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
2.2.10 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which are not performed as expected.
Before you start switch the palettes mode to White Hot mode.
1. Hold
button to show the menu.
2. Select
menu item.
3. Press
button to select the offset. The offset refers to the moving length
of cursor.
4. Press
and
to select the moving direction.
5. Press
to move the cursor to the position of dead pixel.
6. Hold
to correct the dead pixel.
NOTE:
If the menu blocks the dead pixel, hold to perform mirror display.
2.2.11 CVBS OUTPUT
You can view the video on CVBS monitor, to get a better and clear image, more
convenient to check the detail.
1. Connect the USB-CVBS cable to USB port of thermal monocular and to
monitor’s CVBS port.
NOTE:
USB-CVBS cable need to be purchase separately.
NOTE:
CVBS Output function doesn’t support hot plug, so please connect the cable
before power on.
2. Hold
button to show the menu.
3. Select
CVBS
menu item and press
button to turn on or turn off the CVBS
video output.
