07
Bend the two legs of the ladder
N
at right angles
(arrows) as shown, making sure you bend them in the
correct direction. The ladder is then bent at the
central fold line so that the angles of the ladders
match the pitch of the roof (see step 9, below).
Cut ladder
O
from frame
82-08
. Repeat the
instructions in the last two steps to create a double
ladder with feet and handrails that will fit over the
roof of the port hangar.
08
Check the fit of ladder
N
on the roof of the starboard
hangar
80-02
. Glue the two legs into the
corresponding holes in the roof.
Fit ladder
O
into the roof of the port hangar
80-01
and glue in place as shown.
09
10
O
N
G
N
O
H
N
80-01
80-02
Cut the catwalk
H
from frame
82-07
. Again, bend the
rails upwards at right angles and the legs downwards,
as shown.
Cut catwalk
G
from frame
82-07
. Bend the rails
upwards at right angles and the legs downwards,
as shown.
11
12
10
9
AGORA
MODELS
10
AGORA
MODELS
