Take the first of the twin barrels
86-03
and fit it into
one of the gun housings
86-02
. The pegs on the side
of the gun fit into semicircular recesses (arrows).
05
06
Identify the hole in the superstructure deck on the
port side where the first 15cm AA gun
86-03
/
86-
02
/
86-04
fits. Push the peg on the base of the gun
into the hole. No glue is needed.
The second AA gun assembly fits into a hole slightly
to the aft of the first one. Push it in place. Check that
the guns can rotate and the barrels can go up and
down. They are operated manually.
Fix the base plate
86-04
into the housing
86-02
.
02
. THE FIRST HEAVY ANTI-AIRCRAFT GUNS
Check the fit of the base plate
86-04
in the base of
the gun housing. Apply a little superglue around the
lower edge of the housing
86-02
.
Repeat the previous three steps to fit the second pair
of gun barrels
86-03
into the second gun housing
86-02
and fix the second base plate
86-04
in place.
03
04
86-02
86-02
86-03
86-04
86-02
86-04
86-02
86-04
86-02
86-03
86-02
01
02
27
26
AGORA
MODELS
27
AGORA
MODELS