8
F E R R A R I 3 1 2 t4
P a c k 1 1 . s ta g e 9 4
Final result
This is what your model will
look like with the cables tidied
away neatly.
94-10
Cut a strip of two-sided tape 2 mm
wide and 5 mm long. Place the two-
sided tape in the recess above the third
air funnel trumpet.
94-11
Now place the cable
joint onto the two-sided tape
and press it down. This will
keep the line in the correct
position.
10
11
In the next stage
In the next stage
The right inside cover panel for the cockpit.