10
F E R R A R I 3 1 2 t4
P a c k 1 1 . S TA G e 9 5
95-01
Place the model on your work surface.
Use tweezers to remove the clear tube from
the dashboard indicator.
95-03
Gently pull both clear
tubes so that they are both in
line, without making any loops
around the cockpit, as shown.
95-04
Take a strip of silver adhesive tape
and, with a sharp cutter, cut it into several
strips, approx. 5 mm wide and 15–18 mm long.
Keeping the tubes as shown, fix a first strip of
silver tape to hold them in place.
95-05
Keep the cables taut, fix them with a
second strip of silver tape.
95-02
Slide it from under the transparent tube
of the radiator (circled). Connect the tube back
to the dashboard using a pair of tweezers.
05
03
02
01
04